Untitled Document

THE SPRINTER

1. Fold the paper in half diagonally so opposite corners meet.	2. Fold the long edge about 3/4 inch (19 mm).	3. Fold the paper in half towards you and then rotate so that the thickest point is facing up. The squared off point will be facing to the left.	4. Fold the right side over and line it up with the left side and make a vertical crease.	5. Fold the other side down so opposite sides meet.	6. Now, fold one outer flap down to create the first wing. The body will be about 3/4 inch (19 mm) tall	7. Fold the other flap down to complete the plane.

1. Fold the paper in half diagonally so opposite corners meet.

2. Fold the long edge about 3/4 inch (19 mm).

3. Fold the paper in half towards you and then rotate so that the thickest point is facing up. The squared off point will be facing to the left.

4. Fold the right side over and line it up with the left side and make a vertical crease.

5. Fold the other side down so opposite sides meet.

6. Now, fold one outer flap down to create the first wing. The body will be about 3/4 inch (19 mm) tall

7. Fold the other flap down to complete the plane.

This design is a little fussy and takes some careful adjustments to get it to fly straight and level. Don't give up! A staple in the front will keep the fuselage from popping open and will add a little weight in the right place. Try bending the trailing edges of the wings up or down to adjust how it flies.